Stryker Paintball Barrels
 |
 JT Dynasty Stryker Paintball Gun striker USED REFURB Clean Mechanical FS  US $45.00
|
 Stryker Cybrid Paintball Gun Quick Shipper US $39.99
|
 REFURB JT Stryker Cybrid Gun Deluxe Set goggles tank DVD ball hauler loader site US $55.00
|
 JT Stryker Cybrid Gun Deluxe Set goggles tank loader sight knee pads pod pack FS US $65.00
|
 JT Stryker Cybrid Paintball Gun tank goggles loader tube pack Set REFURB Clean US $49.99
|
 Dynasty Stryker Paintball Marker Gun with maskhopper US $75.00
|
 JT Spyder Piranha style Team Dynasty Stryker Paintball Gun Refurbish Clean $85 US $38.00
|
 Used JT Stryker Cybrid Paintball Gun and Accessories US $65.00
|
 Piranha GTI Paintball Gun with 20 oz Stryker co2 Cylinder US $100.00
|
my review on the stryker str-1
stryker cybrid paintball gun HELP!!!!! Leaking co2 out of barrel can any1 help?
stryker cybrid
First off thank you for your time. secondly the problem with my paintball gun i havent use my pb gun that often today i went to stick a 20 oz refillable tank on it and co2 started coming out the barrel and the screw below it i took the tank off unscrewed the flat head bolt below the barrel and replaced the oring oiled it and put it back on still it leaked co2 when a co2 tank was attached. i tilted the pb gun back and forth an heard a noise like something was loose i took the valocity regulator assembly out and tilted the pb gun backwards and out fell a round placstic piece about 1 inch long, is this why the pb gun leaks co2 and if so how do i fix it?
cock the marker before you air it up
As for your "valocity regular assembly" i take that you mean the assembly under the bolt were you adjust the velocity and access the hammer. Put in the hammer first, followed by the spring and a little plastic ring, then the little 'T' that goes in on the end of the spring, followed by the "1 inch plastic piece" that fell out, put the pin back in, slide in your bolt and cocking rod, and it should be good. If you don't get what im saying check the manual that the Cybrid comes with, it has a very detailed exploded view and a guide to replacing the hammer assembly with steps.
Hope this helps you bro
